FactoryTalk on Tour - FG_FTOT_0710
09/08/2010 8:00 AM-4:00 PM
Address:  2446 Schuetz Road, Maryland Heights MO 63043
Join us as we show you the benefits of the FactoryTalk with this hands-on opportunity. We'll make sure you meet your challenging objectives by working through a number of relevant scenarios to help you achieve turning information into action, simplified connectivity, cost-effective productivity, and superior operational management.  More Info...
Seats Available:  10
Cost:  N/A
Registration Closed

Counter Day - Maryland Heights, MO - CD-MH
09/15/2010 11:00 AM-1:00 PM
Address:  2451 Schuetz Road, Maryland Heights MO 63043
Join us for lunch under the tent, talk to experts and check out new products available from French Gerleman.  More Info...
Seats Available: 
Cost:  N/A

RSLogix 5000 Level 4: Motion Prog/Ladder Logic - CCN142
09/21/2010 8:00 AM - 09/23/2010 5:00 PM
Address:  3196 Riverport Tech Center Drive, Maryland Heights MO 63043
This course is intended to provide you with the skills to configure and program Logix5000 applications specifically for integrated motion control functionality using ladder logic, including both SERCOS and analog motion control technologies.  More Info...
Seats Available:  12
Cost:  $1,460.00
Registration Closed

AC/DC Motors and Drives Fundamentals - CCA101
09/28/2010 8:00 AM - 09/29/2010 5:00 PM
Address:  3196 Riverport Tech Center Drive, Maryland Heights MO 63043
This is a skill-building course that provides students with a basic understanding of AC and DC motor and drive concepts and terminology. At the completion of this course, students will have the necessary fundamental knowledge and skills required to attend other Rockwell Automation AC and DC drives courses.  More Info...
Seats Available:  15
Cost:  $1,095.00
Register Now!

PowerFlex 700 Vector Control Configuration - CCA161
09/30/2010 8:00 AM-5:00 PM
Address:  3196 Riverport Tech Center Drive, Maryland Heights MO 63043
This skill-building course introduces techniques and instructions that will assist you in successfully configuring and starting up a PowerFlex 700 vector control drive. Throughout the course, the instructor will demonstrate how to configure PowerFlex 700 drive parameters. The instructor will also demonstrate how to install and commission remote I/O, DeviceNet, and ControlNet communications adapters. After each demonstration, you will be given an application-based exercise that offers extensive hands-on practice using the LCD HIM, DriveExplorer™ software, and DriveExecutive™ software. This one-day course can be taken as a stand-alone course, or it can be taken in conjunction with other courses in the PowerFlex 700 curriculum for further skill development.  More Info...
Seats Available:  12
Cost:  $730.00
Register Now!

PowerFlex 700 Vector Control Configuration - CCA163
10/01/2010 8:00 AM-5:00 PM
Address:  3196 Riverport Drive, Maryland Heights MO 63043
This skill-building course introduces concepts and techniques that will assist you in successfully maintaining and troubleshooting a PowerFlex 700 vector control drive. You will learn how to recognize PowerFlex 700 drive hardware and properly wire the drive. You will also learn to diagnose specific load-related, environmental, and equipment faults. Throughout the course, you will use the LCD HIM, DriveExplorer™ software, and DriveExecutive™ software to clear faults and alarms. After each demonstration, you will be given an application based exercise that offers extensive hands-on practice using the PowerFlex 700 drive. This one-day course can be taken as a stand-alone course, or it can be taken in conjunction with other courses in the PowerFlex 700 curriculum for further skill development.  More Info...
Seats Available:  12
Cost:  $730.00
Register Now!